Innovation

ABRASION RESISTANT

According to ASTM D3389-10 (for coated or unsupported gloves) and ASTM D3884-09 (for uncoated glove fabrics), abrasion resistance is measured by counting the number of revolutions (abrasion cycles) until the glove material fails. A 4-inch circular sample, typically taken from the palm, is mounted on a horizontal platform and subjected to abrasion under a specified vertical load of 500 or 1000 grams. The abrasion is applied using two rotating H-18 wheels made of vitrified clay and silicon carbide particles. The final results, expressed in revolutions, are rated on a scale from 0 to 6, with higher numbers indicating greater abrasion resistance.

CUT RESISTANT

This standard, following the ASTM F2992-15 testing method, evaluates cut resistance using a Tomodynamometer (TDM-100) machine. The test measures the amount of force, in grams, required for a blade to cut through the glove material. Weights are gradually increased until cut-through occurs, with the blade replaced after each attempt. Several tests are performed, and the average value is calculated to determine the final gram rating, which ranges from 200 to 6000 grams. Results are classified into levels A1 through A9, with higher levels indicating greater cut resistance.

HEAT RESISTANT

This standard evaluates a glove’s resistance to heat and flame using three methods: ASTM F1358-08 for ignition resistance and burning behavior, ISO 17493:2000 for heat degradation resistance, and ASTM F1060-08 for conductive heat resistance. Based on these tests, gloves are classified according to their performance under the specified conditions.

PUNCTURE RESISTANT

According to the EN 388 testing method, puncture resistance is measured by determining the maximum force required for a blunt probe to penetrate the glove material. The probe, similar in size and shape to a ballpoint pen, presses into the fabric at a 90° angle at a speed of 100 mm/min. Weights are gradually applied until penetration occurs. Multiple trials are performed, and the average value is used to establish the final rating, expressed in newtons (ranging from 10 to 150). Results are classified into levels 1 to 5, with higher levels indicating stronger puncture resistance.

IMPACT RESISTANT

The ANSI/ISEA 138-2019 standard evaluates impact protection by testing multiple points on the fingers and knuckles. Test results are classified into three performance levels. This American standard builds upon and advances the existing European impact testing standard, EN 388:2016.

COLD RESISTANT

The standard specifies the requirements and test methods used by glove manufacturers to measure A) resistance to convective cold, B) resistance to contact cold, and C) resistance. to water penetration

Water Membrane

MECREX maintains uncompromising standards when it comes to the permeability of water membranes. Whether crafted from PU or PVC, or designed for FR and firefighter gloves, MECREX ensures top-tier performance and durability. With an ultra-thin thickness of just 0.02mm, these membranes are available in single-, double-, and triple-layer configurations. Additionally, MECREX incorporates advanced Event and Porelle water membranes to deliver protection.

Water Repellent

MECREX is constantly innovating in the development of water-repellent materials. Our fabrics and leathers are treated with safe, non-toxic chemicals to achieve superior water resistance. Through durable water-repellent finishes and advanced internal coatings, our products effectively prevent water penetration. The combination of hydrophobic fabrics and membrane coatings offers exceptional protection against rain while maintaining ex cel lent breathabi l it y and comfort

Water Proof

MECREX introduces advanced waterproof fabrics such as nylon and polyester, engineered for superior water protection. The innovative 2-layer and 3-layer constructions ensure exceptional durability and resistance to moisture. Additionally, the outer shell—enhanced through a specialized seam-sealing process—further reinforces the fabric’s waterproof performance, making it perfectly suited for a wide range of demanding outdoor applications.

Patterning

Transform your glove experience with MECREX’s innovative patterned designs
crafted for exceptional ergonomics, a flawless fit,and a striking visual appeal.
Enjoy unmatched durability and long-lasting performance as you elevate both
your style and functionality to an entirely new level.

Fittings

MECREX patterned gloves seamlessly merge traditional craftsmanship with modern innovation to deliver superior ergonomics and a perfect fit. Designed for enhanced performance, they strike the ideal balance between style and functionality. Built for endurance, these gloves offer exceptional durability and long-lasting comfort.